Teckwrap PU Heat Transfer Vinyl

Create one of a kind shirts, personalize your bag or even put a saying on a pillowcase with Teckwrap's PU HTV. This HTV is thin and stretchable.

 Product info:

• Glossy finish 
• May be used in multi-layered designs
• Use on cotton, polyester, or mixed fabrics

Application Instructions:

1. Mirror image
2. Place liner (shiny) side down 
3. Cut using 45° blade
4. Weed excess material
5. Preheat press to 266°F - 284°F (130°C - 140°C) 
6. Preheat base material for 10 - 20 seconds using light pressure
7. Place graphic on base material - liner side up. Then place a Teflon sheet or parchment paper to protect the base material.
8. Press using 266°F - 284°F (130°C - 140°C) for 8 - 12 seconds. Use medium pressure.
9. Remove liner hot or cold

Wash instructions:

• Wait 24 hours after application to wash
• Wash item inside out - vinyl on the inside
• Always use cold water - warm water may cause vinyl to come off
• Avoid using harsh detergents and fabric softeners.
• Do not iron directly on vinyl - place a piece of fabric on top of vinyl 

Please note:

• A test cut is always recommended.
• Colors will appear slightly different on computer monitors.
• Actual size of vinyl sheets can vary up to 0.5 inches.